Erin Yurday
Author
Air conditioning used to be rare in British homes, but demand is rising as summers heat up. The Met Office’s latest State of the UK Climate 2024 report shows the country has been warming at roughly 0.25°C per decade, with the most recent years among the warmest on record.
And while 2022 marked the UK’s first 40.3°C day, summer 2025 also brought a notable heatwave, with several locations recording three to four consecutive days above regional thresholds and a high of 35.8°C in Faversham on July 1. In December 2025, the Met Office forecast that 2026 was likely to be one of the four warmest years on record for global average temperature.
And UK homes are struggling to cope, with 80% of households reporting suffering from overheating during the summer months, according to a study by the University of East London (UEL).
That compares with 18% in 2011.
The study, published in the journal Energy Research & Social Science, asked almost 1,600 households whether they had experienced uncomfortable warmth in one or more rooms during the summer of 2022.
More than half of respondents said the heat disrupted their sleep, and a quarter reported frequent headaches and fatigue. Some said they had to work fewer hours.
With more people considering air conditioning for their homes, we're breaking down the cost, from installation and servicing, to how much it costs to run, and compare running costs for some example models.
For a wall-mounted split system (the more common aircon for homes), typical supply-and-fit prices in the UK run between £1,750 and £3,000 per room, depending on brand, pipe runs and complexity.
Single-room quotes from established installers often sit around £2,000–£2,500 for a 2.5 kW unit, while multi-split or ducted systems rise to £4,500–£10,000+ across multiple rooms.
Portable units don’t need professional installation.
If you're wondering what a split system or a ducted air conditioner is, here is a brief overview.
Wall mounted air conditioners (split-system air conditioner): A split system air conditioner is commonly known as a wall-mounted air conditioning unit. There are two parts: a quiet indoor unit on the wall and an outdoor condenser, connected by refrigerant pipes (F-Gas certified engineer is required for the fitting to be legal). These are quieter and more efficient than portables, but more expensive.
Multi-split air conditioner: There is one outdoor unit serving two to five (sometimes more) indoor units in different rooms. This is good for whole-home coverage without needing multiple outdoor boxes.
Ducted split: This is the more expensive type of air conditioner but it could be more cost-effective if you wish to ventilate every room in the house. The indoor unit is hidden in a loft/cupboard and blows conditioned air through ceiling or wall ducts to multiple rooms.
Portable air conditioner: A single box on wheels that vents hot air out of a window via a hose. This is the easiest and cheapest to set up, but noisier and less efficient than splits.
For just the unit and installation, the costs, according to Checkatrade are: Portable units (no install): £350-£650.
Single-room split/wall mounted: £759-£1,090 per unit, plus £1,150 to install (£1,900-£2,240 per unit total).
Ducted: £990-£1,450 per unit, plus £1,750 to install (£2,740-£3,200 per unit total) Ducted systems are usually installed for those who want aircon in multiple rooms, so expect the total cost to be much more than that per unit).
Other costs need to be factored into the work as well, depending on the type of unit you want installed, such as ductwork, fittings, and additional electrical costs.
Labour costs, Checkatrade says, are on average £600 a day. It will take roughly one day to install a single air con unit and a week for multi-room, complex systems.
System type and size
Efficiency features - higher efficiency costs more, as do features like built-in wifi, air purification, zoning and motion sensors.
Brand and warranty
Installation complexity - if there is a long route needed for refrigerant pipes, or lots of bends or thick wall drilling needed, this all increases the labour and material costs.
Property specifics - how much scaffolding needed, is the building listed etc.
Servicing and cleaning - annual checks for split systems (refrigerant/leaks, coils, filters) and regular filter cleaning keep efficiency up and prevent faults, but of course do add to annual costs.
Building fabric - insulated homes keep cooler for longer and therefore use less energy. You'll also use more energy if the room is in the sun without curtains, you use a lot of heat-creating appliances, or air escapes the room easily (blocking draughts helps)
We looked at a number of air conditioning service providers and typically the cost of a home air conditioner service is between £70 and £120 per unit.
Prices can fluctuate depending on location and how easy it is for the engineer to reach the unit (if access equipment is required, you'll probably need to pay more). You may also have to pay more depending on replacement parts or refrigerant costs for regassing.
For those with more than one unit at home, you'll usually pay less per unit if they're being serviced at the same time.
Manufacturers usually recommend an annual service for split systems. Some installers offer service plans paid monthly.
Based on the electricity price cap from 1 October to 31 December 2026 (26.32p per kWh), a unit using 0.7 kWh an hour costs about 18p an hour to run, and one using 4 kWh an hour about £1.05. Running for five hours a day costs about 92p to £5.26 a day. Over 20 days a year, that's about £18 to £105. For comparison, a tumble dryer cycle costs about 33p to 59p, or £120 to £215 a year if used daily.
Read more: How Much Electricity Does My Appliance Use? From Fans to Slow Cookers
Using the price cap rate for 1 October to 31 December 2026 (26.32p per kWh, with no VAT on electricity until 31 March 2027), we have calculated the running costs for some typical air conditioner units:
Brand | Model | Unit price | Average energy used per hour of cooling (kWh) | Cost per hour | Cost per five hours |
Daikin | Stylish FTXA25 | £1,341 — £1,430 | 0.56 | £0.15 | £0.74 |
Mitsubishi Electric | MSZ-AP25VGK | £755 — £839 | 0.6 | £0.16 | £0.79 |
Fujitsu | ASYG09KPCA | £598 — £688 | 0.71 | £0.19 | £0.93 |
De’Longhi | PAC EL92 Silent | £590 — £630 | 0.81 | £0.21 | £1.07 |
electriQ | Easy-Fit 12000 (wall split) | £599.98 — £839.98 | 0.87 | £0.23 | £1.14 |
Meaco | MeacoCool MC 12000 Pro | £379 — £540 | 1.34 | £0.35 | £1.76 |
Not necessarily.
A modern wall-mounted unit cooling a small room typically draws about 0.5–0.8 kW, so it uses 0.5–0.8 kWh an hour. Portable units typically draw 0.8–1.5 kW, so they cost more per hour than an efficient wall-split but are cheaper upfront.
Our research into how much energy appliances use found that typical air conditioning units draw between 0.7 kW and 4 kW, consuming 0.7 to 4 kWh of electricity if they run continuously at that power for one hour.
The wall-mounted and portable units in our table use 0.56 to 1.34 kWh an hour, or about 15p to 35p an hour at the October to December 2026 price cap rate.
A typical tower fan uses around 40 to 100 watts, so it costs roughly 1p to 3p an hour to run at the October to December 2026 price cap rate of 26.32p per kWh. For example, a 60W tower fan costs about 1.6p an hour. Check your fan’s wattage on its label or in the manual for a more accurate figure.
Daikin: sells fixed systems in the UK (wall-mounted, multi-split and ducted), which must be fitted by an F-gas certified installer. The Stylish FTXA25 in our table uses about 0.56 kWh an hour when cooling (about 15p).
Mitsubishi Electric: its M Series includes wall-mounted and floor-standing units, which can be combined into multi-split systems and need professional installation. The MSZ-AP25VGK in our table uses about 0.6 kWh an hour (about 16p).
Fujitsu: sells wall-mounted, multi-split and ducted systems, all installed by an F-gas engineer. The ASYG09KPCA in our table uses about 0.71 kWh an hour (about 19p).
electriQ: Appliances Direct's own brand. Sells portable units and wall-mounted split units, including Easy-Fit models designed for simpler installation. The Easy-Fit 12000 in our table uses about 0.87 kWh an hour (about 23p).
De'Longhi: its UK range is mainly Pinguino portable units, which need no installation and vent hot air through a window hose. The PAC EL92 Silent in our table uses about 0.81 kWh an hour (about 21p).
Meaco: sells MeacoCool portable units, some of which can also heat. They need no installation and vent through a window. The MC 12000 Pro in our table uses about 1.34 kWh an hour (about 35p).
Dyson: makes fans and purifier fans, not air conditioners. They move air but don't lower the room temperature, so they aren't included in the running-cost table.
Wall-mounted split systems generally use less electricity than portable units to cool the same room, but cost more to buy and install (see the installation costs above).
Brands and models named here are examples only. This article doesn't cover the whole market, and other products may suit some homes better.
Read more:
Air conditioning used to be rare in British homes, but demand is rising as summers heat up. The Met Office’s latest State of the UK Climate 2024 report shows the country has been warming at roughly 0.25°C per decade, with the most recent years among the warmest on record.
And while 2022 marked the UK’s first 40.3°C day, summer 2025 also brought a notable heatwave, with several locations recording three to four consecutive days above regional thresholds and a high of 35.8°C in Faversham on July 1. In December 2025, the Met Office forecast that 2026 was likely to be one of the four warmest years on record for global average temperature.
And UK homes are struggling to cope, with 80% of households reporting suffering from overheating during the summer months, according to a study by the University of East London (UEL).
That compares with 18% in 2011.
The study, published in the journal Energy Research & Social Science, asked almost 1,600 households whether they had experienced uncomfortable warmth in one or more rooms during the summer of 2022.
More than half of respondents said the heat disrupted their sleep, and a quarter reported frequent headaches and fatigue. Some said they had to work fewer hours.
With more people considering air conditioning for their homes, we're breaking down the cost, from installation and servicing, to how much it costs to run, and compare running costs for some example models.
For a wall-mounted split system (the more common aircon for homes), typical supply-and-fit prices in the UK run between £1,750 and £3,000 per room, depending on brand, pipe runs and complexity.
Single-room quotes from established installers often sit around £2,000–£2,500 for a 2.5 kW unit, while multi-split or ducted systems rise to £4,500–£10,000+ across multiple rooms.
Portable units don’t need professional installation.
If you're wondering what a split system or a ducted air conditioner is, here is a brief overview.
Wall mounted air conditioners (split-system air conditioner): A split system air conditioner is commonly known as a wall-mounted air conditioning unit. There are two parts: a quiet indoor unit on the wall and an outdoor condenser, connected by refrigerant pipes (F-Gas certified engineer is required for the fitting to be legal). These are quieter and more efficient than portables, but more expensive.
Multi-split air conditioner: There is one outdoor unit serving two to five (sometimes more) indoor units in different rooms. This is good for whole-home coverage without needing multiple outdoor boxes.
Ducted split: This is the more expensive type of air conditioner but it could be more cost-effective if you wish to ventilate every room in the house. The indoor unit is hidden in a loft/cupboard and blows conditioned air through ceiling or wall ducts to multiple rooms.
Portable air conditioner: A single box on wheels that vents hot air out of a window via a hose. This is the easiest and cheapest to set up, but noisier and less efficient than splits.
For just the unit and installation, the costs, according to Checkatrade are: Portable units (no install): £350-£650.
Single-room split/wall mounted: £759-£1,090 per unit, plus £1,150 to install (£1,900-£2,240 per unit total).
Ducted: £990-£1,450 per unit, plus £1,750 to install (£2,740-£3,200 per unit total) Ducted systems are usually installed for those who want aircon in multiple rooms, so expect the total cost to be much more than that per unit).
Other costs need to be factored into the work as well, depending on the type of unit you want installed, such as ductwork, fittings, and additional electrical costs.
Labour costs, Checkatrade says, are on average £600 a day. It will take roughly one day to install a single air con unit and a week for multi-room, complex systems.
System type and size
Efficiency features - higher efficiency costs more, as do features like built-in wifi, air purification, zoning and motion sensors.
Brand and warranty
Installation complexity - if there is a long route needed for refrigerant pipes, or lots of bends or thick wall drilling needed, this all increases the labour and material costs.
Property specifics - how much scaffolding needed, is the building listed etc.
Servicing and cleaning - annual checks for split systems (refrigerant/leaks, coils, filters) and regular filter cleaning keep efficiency up and prevent faults, but of course do add to annual costs.
Building fabric - insulated homes keep cooler for longer and therefore use less energy. You'll also use more energy if the room is in the sun without curtains, you use a lot of heat-creating appliances, or air escapes the room easily (blocking draughts helps)
We looked at a number of air conditioning service providers and typically the cost of a home air conditioner service is between £70 and £120 per unit.
Prices can fluctuate depending on location and how easy it is for the engineer to reach the unit (if access equipment is required, you'll probably need to pay more). You may also have to pay more depending on replacement parts or refrigerant costs for regassing.
For those with more than one unit at home, you'll usually pay less per unit if they're being serviced at the same time.
Manufacturers usually recommend an annual service for split systems. Some installers offer service plans paid monthly.
Based on the electricity price cap from 1 October to 31 December 2026 (26.32p per kWh), a unit using 0.7 kWh an hour costs about 18p an hour to run, and one using 4 kWh an hour about £1.05. Running for five hours a day costs about 92p to £5.26 a day. Over 20 days a year, that's about £18 to £105. For comparison, a tumble dryer cycle costs about 33p to 59p, or £120 to £215 a year if used daily.
Read more: How Much Electricity Does My Appliance Use? From Fans to Slow Cookers
Using the price cap rate for 1 October to 31 December 2026 (26.32p per kWh, with no VAT on electricity until 31 March 2027), we have calculated the running costs for some typical air conditioner units:
Brand | Model | Unit price | Average energy used per hour of cooling (kWh) | Cost per hour | Cost per five hours |
Daikin | Stylish FTXA25 | £1,341 — £1,430 | 0.56 | £0.15 | £0.74 |
Mitsubishi Electric | MSZ-AP25VGK | £755 — £839 | 0.6 | £0.16 | £0.79 |
Fujitsu | ASYG09KPCA | £598 — £688 | 0.71 | £0.19 | £0.93 |
De’Longhi | PAC EL92 Silent | £590 — £630 | 0.81 | £0.21 | £1.07 |
electriQ | Easy-Fit 12000 (wall split) | £599.98 — £839.98 | 0.87 | £0.23 | £1.14 |
Meaco | MeacoCool MC 12000 Pro | £379 — £540 | 1.34 | £0.35 | £1.76 |
Not necessarily.
A modern wall-mounted unit cooling a small room typically draws about 0.5–0.8 kW, so it uses 0.5–0.8 kWh an hour. Portable units typically draw 0.8–1.5 kW, so they cost more per hour than an efficient wall-split but are cheaper upfront.
Our research into how much energy appliances use found that typical air conditioning units draw between 0.7 kW and 4 kW, consuming 0.7 to 4 kWh of electricity if they run continuously at that power for one hour.
The wall-mounted and portable units in our table use 0.56 to 1.34 kWh an hour, or about 15p to 35p an hour at the October to December 2026 price cap rate.
A typical tower fan uses around 40 to 100 watts, so it costs roughly 1p to 3p an hour to run at the October to December 2026 price cap rate of 26.32p per kWh. For example, a 60W tower fan costs about 1.6p an hour. Check your fan’s wattage on its label or in the manual for a more accurate figure.
Daikin: sells fixed systems in the UK (wall-mounted, multi-split and ducted), which must be fitted by an F-gas certified installer. The Stylish FTXA25 in our table uses about 0.56 kWh an hour when cooling (about 15p).
Mitsubishi Electric: its M Series includes wall-mounted and floor-standing units, which can be combined into multi-split systems and need professional installation. The MSZ-AP25VGK in our table uses about 0.6 kWh an hour (about 16p).
Fujitsu: sells wall-mounted, multi-split and ducted systems, all installed by an F-gas engineer. The ASYG09KPCA in our table uses about 0.71 kWh an hour (about 19p).
electriQ: Appliances Direct's own brand. Sells portable units and wall-mounted split units, including Easy-Fit models designed for simpler installation. The Easy-Fit 12000 in our table uses about 0.87 kWh an hour (about 23p).
De'Longhi: its UK range is mainly Pinguino portable units, which need no installation and vent hot air through a window hose. The PAC EL92 Silent in our table uses about 0.81 kWh an hour (about 21p).
Meaco: sells MeacoCool portable units, some of which can also heat. They need no installation and vent through a window. The MC 12000 Pro in our table uses about 1.34 kWh an hour (about 35p).
Dyson: makes fans and purifier fans, not air conditioners. They move air but don't lower the room temperature, so they aren't included in the running-cost table.
Wall-mounted split systems generally use less electricity than portable units to cool the same room, but cost more to buy and install (see the installation costs above).
Brands and models named here are examples only. This article doesn't cover the whole market, and other products may suit some homes better.
Read more: